NavCom SF-3050 Rev.E - Manual (Page 17)

SF-3050 GNSS Product User Guide
– Rev E
xv
“Upload a Unified Firmware File” section;
ad
ded “Upload a Single Firmware File”
section; updated the
“Upload Software
Options” section and added Bundle A;
added
“Upload Software Options via the
Input Terminal” section; updated “Upload
StarFire License” section to align it with
new StarUtil 3000 GUIs and their
functionality;
added “How to Cancel a
StarFire License” section; added the
“Enable or Disable Receiver Tracking
and/or Use of Select Signals and
Frequencies” section; added “Enable or
Disable Receiver Use of Signals for
Navigation” section
Chapter 2:
Updated “GNSS Sensor
System” section: added software Bundle
A; updated the RTK description; deleted
footnotes and revised notes; in the
“Accuracy” section: added info re L1-RTK;
in the “SBAS” section: added a Note re
the TRACKINGMODE command and ;
added a footnote that Galileo is not
supported in the current firmware
(v.2.0.22.0);
in the “Features” section:
updated “NMEA-0183 Data”; added
description of software bundle SF-3050A;
deleted footnotes from SF-3050M;
updated “Ethernet Connection”; updated
“Airborne”;
added photo of L1 antenna
under the L1/G1 description; updated
Figure 40 to show L1 antenna; updated
“Unique Features” section: under “Multi-
Format RTK,” added Moving Base RTK
and Heading; and
added “User-Defined
Datum”, “Internal Memory”, “Control of
Power Consumption”, “CORS Support”,
and
“NTRIP Support” bulleted items
Chapter 3: Added drawing of new power
cable to Figure 44 (previously Figure 37);
updated PIN assignments of updated
Ethernet cable in Table 17; updated
“Bluetooth Communications Setup”
section and updated the graphics for