NavCom SF-3050 Rev.E - Manual (Page 36)

SF-3050 Product User Guide
– Rev E
1-10
Figure 6: Connection at Incorrect Baud Rate

For remote operation, connection to
either Com 1 or Com 2 is highly
recommended as a backup to the
Ethernet interface. The Com1 or Com 2
backup connection can be made via a
cell modem, MOXA to Ethernet, etc.
Determine Current Firmware Versions
The user determines if the most current firmware is
installed in the SF-3050. The version of the installed
firmware is important to ensure the proper operation
of the receiver.
In StarUtil 3000, checking the contents of the
Firmware Info window (see Figure 7) on the Receiver
Options tab is the easiest way to determine if the
installed firmware is the most current. An alternative
method is to use the Input Terminal window (see
Determine Firmware Version via the Input Terminal,
below).
17. Click Receiver Options on the Detailed Views
menu to open the Receiver Options tab (see
Figure 7).