NavCom SF-3050 Rev.E - Manual (Page 58)

SF-3050 Product User Guide
– Rev E
1-32
Upload User Profile (optional)
If desired, replace the factory default user profile with
a predefined profile, or create a profile. Refer to the
StarUtil 3000 User Guide for detailed instructions.

Predefined user profiles are available in the
Navcom\User Profiles folder saved on the PC
from the SF-3050 Product Configuration USB
Flash Drive.

Refer to Chapter 5/User Profiles in this guide for
information on profiles.
Enable or Disable Receiver Tracking and/or
Use of Select Signals and Frequencies
Receiver tracking of various signals and frequencies
can be enabled or disabled.
Refer to the [TRACKINGMODE] and
[NAVMEASUSE] commands in the Sapphire
Technical Reference Manual for detailed instructions
on enabling and disabling the tracking of and receiver
use of various signals and frequencies. Also refer to
the StarUtil 3000 User Guide.

These commands are used primarily for
engineering experiments or receiver
testing. They are not recommended for
use in other applications.
Enable or Disable Receiver Use of Signals
and Frequencies for Navigation
Receiver use of various signals and frequencies for
navigation can be enabled or disabled.