NavCom SF-3050 Rev.E - Manual (Page 62)

SF-3050 Product User Guide
– Rev E
2-36
providing a significant signal-to-noise ratio advantage
over competing technologies, among other benefits.
There are four software bundles: the SF-3050A, SF-
3050G, SF-3050S, and SF-3050M. Depending upon
the bundle, this receiver provides, but is not limited to:
 NavCom‟s StarFire 1
Network: A worldwide
Satellite Based Augmentation System (SBAS) for
decimeter level position accuracy (post-
convergence period). Refer to
Appendix C for
detailed information.

1
Dependent on the bundle: Subscription
and Software Option Required

RTK: This unique receiver is designed to integrate
easily into Real-Time Kinematic (RTK), field data
verification, topographical surveys, and a wide
variety of surveying applications. The system
resolves ambiguities at startup or on satellite
reacquisition typically within 2 seconds. The
SF-3050 delivers centimeter level position
accuracy via external RTK
2
correction formats.
The receiver is capable of NCT RTK
/UltraRTK™,
RTCM 2.3 and 3.1 (code and phase), Network
RTK, and CMR/CMR+ DGPS operating methods.
The operating software is also capable of
supporting an external radio modem.

2
Dependent on the bundle: Separate
Software Option Required