Avoiding user profile loading errors, Third-party controller configuration settings, Over the air starfire licensing – NavCom SF-3050 Rev.E User Manual
Page 148
SF-3050 Product User Guide
– Rev E
5-122
The profile NONE is subject to change.
Avoiding User Profile Loading Errors
StarUtil 3000 v.1.0.0 and later scans user profiles
before loading them to adjust port settings and
reduce the likelihood of communication errors.
Communication errors still occur, and this section
aids in resolving common issues.
As a user profile is loaded into the receiver, each
command line is acted upon as it is received. A profile
loading error occurs if the communication link
between the PC and the receiver is broken before all
command lines are received. To avoid this loading
error, the best practice is to preview the control port
baud rate in a user profile before loading the profile.
Refer to the StarUtil 3000 User Guide for detailed
instructions.
Third-Party Controller Configuration Settings
Refer to the third-party controller solution
manual/user guide if your SF-3050 GNSS sensor is
part of an integrated solution.
Over the Air StarFire Licensing
Over the Air (OTA) StarFire Licensing is the easiest
way to install a StarFire license. The installation of a
purchased license is accomplished via radio
broadcast. Over the Air StarFire Licensing is
especially convenient for receivers in remote
locations in the field.