Microcom 438 - Manual (Page 21)

Getting Started Chapter 3
3-6 438 Operator’s Manual - 880052-0100
Figure 3-5 Print Button and Status Indicator Light
3.4.1 Print Button
Operation Description
Printing a label
Press the Print Button while the printer is IDLE or PAUSED to
reprint the last label.
A power up label will print after a power ON cycle when the Print
Button is pressed.
Pause printing
Press the Print Button briefly while the printer is printing to enter
the PAUSED mode.
Press the Print Button again to continue printing.
Feeding labels
(Line feed)
Press & hold the Print Button while the printer is IDLE to advance
label media. The printer will continue advancing label media until
the Print Button is released.
Table 3-2 Print Button Description
Front Panel
and LED
(Status Light)