Measurement Computing DBK70 - Manual (Page 8)

2-2 Introduction 946898 DBK70 User’s Manual
Since the DBK70 contains a non-volatile memory that holds all of its setup parameters, the PC need only
be connected to initially configure the DBK70 or to make configuration changes. During normal operation,
no PC connection is required. In addition to configuring the DBK70, the included software also allows the
operator to view parameters on-screen in real-time. The DBK70 configuration and monitoring software
runs on any PC that is using Windows 95, 98, Me, 2000, or NT.
The DBK70’s operation is completely configurable through the use of supplied software and a
configuration database. Through this software and database a user can quickly change the configuration of
any and all output channels, monitor in real time the operation of each output channel, and/or create or edit
members of the configuration database.
The DBK70 can be operated as an accessory to IOtech’s DaqBook, DaqBoard, LogBook, or WaveBook
product lines, or as a stand-alone device providing analog outputs for any voltage measurement instrument
including hand-held meters and strip chart recorders.
Stand-alone Mode
Used with IOtech Data Acquisition
CA-208