Measurement Computing DBK70 User Manual
Dbk70, Vehicle network interface
Table of contents
Document Outline
- DBK70 ... User's Manual
- Warnings, Cautions...
- Table of Contents
- 1-Unpacking the DBK70
- 2-Introduction
- 3-System Setup
- 4-Hardware Reference
- 5-PidPRO and PidPRO+
- Introduction
- PidPRO Quick-Start
- Database Management
- Reference Guide
- Main Window
- Database Item View Window
- Detailed View
- Name
- Comments
- Source Channel
- Message Send Rate
- Msg 1 and Msg 2
- If no match in ___ mS and
- set chan to ____ uV (two separate, but closely related f
- Filter
- Mask
- Start Bit
- Data Length (bits)
- Format
- Byte Order
- Raw -> Units Conversion Method
- Low Limit / High Limit
- Units/Bit
- Binary Point
- Set to Limits (Button)
- Range Low / Range High
- Analog to Engineering Units Conversion
- Summary View
- Name - See “Name” in Detailed View, page 5-19.
- Comments - See “Comments” in Detailed View, page 5-19.
- Update Rate - See “Message Send Rate” in Detailed View, page
- Source Channel - See “Source Channel” in Detailed View, page
- Index- See “Start Bit” in Detailed View, page 5-22.
- Length - See “Data Length (bits)” in Detailed View, page 5-2
- Storage Type - See “Format” in Detailed View, page 5-23.
- Output Scale
- Output Offset
- Display Scale
- Display Offset
- Option Value – See “Byte Order” in Detailed View, page 5-23.
- Message – Similar to “Msg 1 and Msg 2” in Detailed View, pag
- Filter – See “Filter” in Detailed View, page 5-22.
- Timeout – See “If no match in ___mS ” in Detailed View, pag
- Default Value – See “set chan to __µV” in Detailed View, pag
- Analog to Engineering Units Conversion – See “Analog to Eng
- Network Monitor PidPRO+ Only
- Parsing Serial Strings
- 6-Fundamentals of Obtaining Vehicle Data
- 7-Deciphering the PID $00, $20, and $40 Messages
- 8-Troubleshooting
- 9-Specifications
- Appendix A - DBK70 Firmware Upgrade Instructions
- Appendix B - Scale and Offset in Summary View