Measurement Computing DBK70 - Manual (Page 21)

DBK70 User’s Manual 919092 Hardware Reference 4-3
Direct Parameter Analog Output Ports 1 and 2
The Direct Parameter Analog Output Ports provide a direct connection to the analog outputs sourced by the
internal 4-parameter capture cards. If four cards are installed, 16 analog outputs will be available; channels
0-7 on Port 1 and 8-15 on Port 2. These can be directly connected to any high impedance input voltage
measurement device.
Port 1
Pin# Name Pin# Name Pin# Name
1 Analog out 1 11 NC 21 Analog Gnd
2 Analog out 2 12 NC 22 Analog Gnd
3 Analog out 3 13 NC 23 Analog Gnd
4 Analog out 4 14 Analog Gnd 24 Analog Gnd
5 Analog out 5 15 Analog Gnd 25 Analog Gnd
6 Analog out 6 16 Analog Gnd
7 Analog out 7 17 Analog Gnd
8 Analog out 8 18 Analog Gnd
9 NC 19 Analog Gnd
10 NC 20 Analog Gnd
Port 2
Pin# Name Pin# Name Pin# Name
1 Analog out 9 11 NC 21 Analog Gnd
2 Analog out 10 12 NC 22 Analog Gnd
3 Analog out 11 13 NC 23 Analog Gnd
4 Analog out 12 14 Analog Gnd 24 Analog Gnd
5 Analog out 13 15 Analog Gnd 25 Analog Gnd
6 Analog out 14 16 Analog Gnd
7 Analog out 15 17 Analog Gnd
8 Analog out 16 18 Analog Gnd
9 NC 19 Analog Gnd
10 NC 20 Analog Gnd
P1 Multiplexed Output Port
This port is for attaching the DBK70 to a DaqBook, DaqBoard, Daq PC-Card, or LogBook via a short
ribbon cable.