Specifications, 1 standard specifications, 1 introduction 3 – K-Patents PR-21-S User Manual
Page 9: Sensor pr-21-s with ansi/din/jis flange
1 Introduction
3
1.1 Standard specifications
SPECIFICATIONS
K-PATENTS OY
P.O. BOX 77
ELANNONTIE 5
FI-01511 VANTAA, FINLAND
PHONE: INT.+358-207-291 570
FAX: INT.+358-207-291 577
[email protected]
WWW.kPATENTs.cOm
We reserve right to technical alterations.
K-PATENTS, INC.
1804 cENTRE POINT cIRcLE, sUITE 106
NAPERVILLE, IL 60563
U.s.A.
PHONE: (630) 955 1545
FAX: (630) 955 1585
[email protected]
WWW.kPATENTs.cOm
Refractive Index range:
Low range R.I. 1.320...1.460
High range R.I. 1.380...1.530
Max span:
R.I. 0.120
Accuracy:
Typically ± 0.1% by weight (depending on the process medium).
Repeatability and stability correspond to accuracy.
Speed of response:
1.0 s undamped, damping time selectable up to 5 min
Calibration:
With Cargille standard R.I. liquids
Temperature compensation:
Automatic, digital compensation
Instrument verification:
According to ISO 9000 quality system: with standard R.I. liquids and
Transmitter's menu guided procedure
Process temperature:
max. 150°C (300°F) (for higher temp. consult factory)
Ambient temperature:
Sensor: max. 45°C (113°F), min. -20°C (-4°F)
Indicating transmitter: max. 50°C (122°F), min. 0°C (32°F)
Process pressure:
Flange connections up to 25 bar (350 psi), Sandvik clamp static pressure
up to 20 bar (300 psi)/operational pressure up to 10 bar (150 psi)
Sensor protection class:
IP65, Nema 4X
SENSOR PR-21-S-STD (STANDARD PROBE) AND PR-21-S-LPL/LPS (LONG PROBE):
Process connection:
Sandvik L-clamp, 88 mm; DIN-flange 2656. PN 25, DN80; ANSI-flange,
150 psi, 3inch; ANSI-flange, 300 psi, 3 inch; JIS-flange, 10K 80 A
Process wetted parts:
AISI 316L stainless steel, prism gaskets Kalrez (prism pads teflon)
Sensor insertion length:
-STD = standard; -LPL = Long probe 302 mm; -LPS = Long probe 150 mm
Sensor weight:
Sandvik-clamp 7 kg (15 lbs)/Flange DIN/ANSI/JIS 10.5 kg (23 lbs)
SENSOR PR-21-S-LPH (RETRACTABLE LONG PROBE):
Process connection:
Sandvik L-clamp, 88 mm
Process wetted parts:
AISI 316L stainless steel, sensor tip SAF2205, prism gaskets Kalrez (prism
pads teflon)
Sensor weight:
10.5 kg (23 lbs)
INDICATING TRANSMITTER DTR:
Display:
320x240 pixel graphical LCD with LED backlight
Keypad:
18 membrane keys
Current output:
4-20 mA/0-20 mA, max. load 1000 Ohm, Galvanic isolation
1500 V DC or AC (peak), Built-in hold function during prism wash
Ethernet connection:
10/100 Mbit/s, data acquisition over UDP/IP Protocol with K-Patents
PR-11111 data logging software
Power:
AC input 100-240 VAC/50-60 Hz, optional 24 VDC, 30 VA
Alarms/Wash relays:
Two built-in signal relays, max. 240 V AC, 3 A
Sensor connectivity:
One or two sensors can be connected to the DTR. Sensors independent
of each other: own parameter sets and usable in different applications.
Two current outputs configurable independently to indicate process
concentration or temperature of either sensor.
Transmitter protection class:
Enclosure IP66, Nema 4X
Indicating transmitter weight:
4.5 kg (10 lbs)
INTERCONNECTING CABLE:
PR-8230 cable. A paired cable with shielded ground.
Screwed connector PR-8031 to connect cable to sensor PR-21-S
Interconnecting cable length:
Standard 10 m (33 ft), max. 200 m (660 ft)
OPTIONS:
Prism wash, intrinsic safety and hazardous area approvals, cable fittings to
Indicating transmitter DTR
ORDERING INFORMATION:
- Sensor type and process connection
- Desired scale
- Properties of process solution
- Process temperature and pressure range
- Process flow range and pipe diameter
- Supply voltage and frequency
- Length of interconnecting cable
- Options and accessories
Sensor PR-21-S with Sandvik clamp
7,9
200
0,718
6,3
160
DN 80 PN 40
7,3
185
0,75
19
5,9
150
JIS 80A 10k
7,5
190,50
0,75
19,10
6,0
152,40
ANSI 3" 150lbs
8,2
209,50
0,88
22,30
6,6
168,10
ANSI 3" 300lbs
Sheet 2/2
Appr.
Drawn
Drawing number
Drawing description
Mass
General tolerances
Revision
B
Scale
1:3
Material
2853
DIM
PR-21-S-STD
DIN, JIS and ANSI 3" 150lbs or 300lbs flanges
15.08.2013 IA
20.08.2013 TL
12.03kg
ISO2768-fK
14,3
364
5,9
149,50
5,5
139
2,5
63,50
5,1
130
4,7
119
Sheet 1/2
Appr.
Drawn
Drawing number
Drawing description
Mass
General tolerances
Revision
B
Scale
1:2
Material
2853
DIM
PR-21-S-STD
DIN, JIS and ANSI 3" 150lbs or 300lbs flanges
15.08.2013 IA
20.08.2013 TL
ISO2768-fK
12.03kg
14,3
364
5,9
149,50
5,5
139
2,5
63,50
3,9
99
4,7
119
Appr.
Drawn
Drawing number
Drawing description
Mass
General tolerances
Revision
A
Scale
1:2
Material
DIM
PR-21-S-STD
Sandvik
16.08.2013 IA
2857
20.08.2013 TL
ISO2768-fK
12.03kg
Sensor PR-21-S with ANSI/DIN/JIS flange