K-Patents PR-21-S - Manual (Page 44)

38 PR-21-S instruction manual
Figure 5.3 Display setup menu
Figure 5.4 Main display format selection.
display. The current format is shown on the display format selection display, see
Figure 5.4 below.
Note: An automatic 60 s (in verification 5 min) timeout will make backsteps from
any display until the Main display is reached.
Display appearance: The 2 DISPLAY BACKLIGHT & CONTRAST can be selected from the Dis-
play setup menu (Figure 5.3). The values can be changed by using the arrow soft
keys or alternatively a one digit input, for example 8 designates 80 % when adjust-
ing contrast.
The 3 DISPLAY INVERSION contains two choices. The default setting of the display is 1 POS-
ITIVE DISPLAY , i.e. yellow background and black text. However, in some environments
the display may be clearer if 2 NEGATIVE DISPLAY , i.e. black background and yellow text,
is chosen.
Bar graph settings: The command 4 BAR GRAPH allows you to set the bar graph span
and zero separately for sensors A and B.
Note: Bar graph is only visible when Main display is in the bar graph format, see
above.
Display language: The command 5 DISPLAY LANGUAGE lets you choose the DTR display
language from the existing display languages, i.e. the languages that are loaded
into the DTR. The default language is English and it is always available. The order
and number of the languages in the language menu varies depending on what lan-
guages are loaded into the DTR. Language change through this menu is immediate.
5.3 Viewing system information
The DESCRIPTION selection from the Main menu (Figure 5.2) opens a path to complete
information about the system and calibration. This path is risk-free in the sense