Hypertherm HT4001 Plasma Arc Cutting System - Manual (Page 75)

INSTALLATION
1-96
4-22
HT4001
Instruction Manual
RHF Console Connections
See page 4-6 for power supply connections to RHF console.
Cooling Hose Set – RHF Console to Water Chiller
There are two hoses in the hose set. For two-torch systems, double the hose order.
Caution Connect WATER OUT of the RHF console to RETURN of the water chiller, and
connect WATER IN of the RHF console to DISCHARGE of the water chiller.
Injection Water Hose – RHF Console to Gas Console
Note that the water injection hose is left-hand threaded. Turn counterclockwise to tighten.
See pages 4-26 through 4-29 for remaining gas console connections.
15
See instruction manual IM241 (802410) for more information on the water chiller.
16
RED RED
GRN GRN
RED RED
Part No. Length
024335 26 in (.6 m)
024315 5 ft (1.5 m)
024046 6 ft (1.8 m)
024032 10 ft (3 m)
024261 11.5 ft (3.5 m)
024130 12 ft (3.6 m)
024132 14 ft (4.2 m)
Part No. Length
024033 15 ft (4.5 m)
024018 20 ft (6 m)
024034 25 ft (7.5 m)
024035 30 ft (9 m)
024036 35 ft (10.5 m)
024037 40 ft (12.2 m)
Part No. Length
024208 45 ft (13.7 m)
024258 50 ft (15 m)
024179 53 ft (16 m)
024128 60 ft (18 m)
024345 75 ft (23 m)
024346 100 ft (30.5 m)
Part No. Length
028652 10 ft (3 m)
028440 15 ft (4.5 m)
028653 20 ft (6 m)
028441 25 ft (7.5 m)
028442 50 ft (15 m)
Part No. Length
028443 75 ft (23 m)
028444 100 ft (30.5 m)
028445 150 ft (46 m)
028637 200 ft (61 m)