Power supply connections (cont.) – Hypertherm HT4001 Plasma Arc Cutting System User Manual
Page 67

INSTALLATION
10-99
4-14
HT4001
Instruction Manual
Power Supply Connections (cont.)
Machine Interface V/C Cable – PS to Machine Interface
Note:
If HT4001 system uses the digital remote V/C unit to set voltage and current, skip this step. The
machine interface V/C cable is used only with the programmable remote.
Before connecting the machine V/C interface cable, see the wiring diagrams in this manual and verify that the
correct plug is attached to the µP control PCB REC6 receptacle.
PS END
SCKT
COLOR
DESCRIPTION
1
Black
Current 5
2
Wht
Current 10
3
Red
Current 20
4
Green
Current 40
5
Orange
Current 80
6
Blue
Current 100
7
White/Black
Current 200
8
Red/Black
Current 400
9
Green/Black
Current 800
10
Shield
Shield
11
Blue/Black
Current ICom
12
Black/White
spare
13
Red/White
spare
14
Green/White
Voltage V1.25
15
Blue/White
Voltage V2.5
16
Black/Red
Voltage V5
17
White/Red
Voltage V10
18
Orange/Red
Voltage V20
19
Blue/Red
Voltage V40
20
Red/Green
Voltage V80
21
Orange/Green
Voltage V100
22
Black/White/Red
Voltage V200
23
White/Black/Red
Voltage VCom
8
PS End
1X7
Part No.
Length
023851
15 ft (4.5 m)
023852
25 ft (7.5 m)
023853
35 ft (10.6 m)
023854
50 ft (15 m)
Part No.
Length
023855
75 ft (23 m)
023856
100 ft (30.5 m)
023903
125 ft (38 m)
023857
150 ft (46 m)
023858
200 ft (61 m)