Pac620 machine torches -7, Specifications, Warning – Hypertherm HT4001 Plasma Arc Cutting System User Manual
Page 34

2.5" (64 mm)
1.88"
(48 mm)
0.4"
(10 mm)
0.62"
(16 mm)
1.2"
(30 mm)
6.02" (153 mm)
9.35" (238 mm)
15.37" (390 mm)
17.15" (435 mm)
2"
(51 mm)
1.98"
(50 mm)
2"
(51 mm)
1.98"
(50 mm)
1.88" (48 mm)
0.87"
(22 mm)
1.77"
(45 mm)
11.75" (298 mm)
5.4" (137 mm)
SPECIFICATIONS
1-98
HT4001
Instruction Manual
2-7
PAC620 Machine Torches (028507 – Standard / 028741 – Bevel)
Figure 2-2
PAC620 Standard Torch Assembly with Dimensions
Figure 2-3
PAC620 Bevel Torch Assembly with Dimensions
Maximum cutting thickness ..................................See Cut Charts for details.
Maximum current at 100% duty cycle ..................760 A
Plasma Gas Flow .................................................Oxygen – 114 scfh (54 l/min)
Nitrogen – 223 scfh (105 l/min)
Injection Water Flow Rate ....................................0.38 to 0.48 gpm (1.4 to 1.8 l/min)
Water coolant flow rate (max.) .............................1.7 gpm (6.4 l/min)
Dimensions and Weight:
Diameter...............................................................2" (50 mm)
Length ..................................................................17.15" (435 mm) standard;
15.37" (390 mm) bevel
Weight ..................................................................3-1/2 lbs (1.58 kg)
WARNING
CE countries must operate the PAC620 machine torch using a special CE retaining cap in order to
comply with CE regulations. Part numbers for the CE retaining caps are indicated in the cut charts
(Section 5).