Gasboy Fleet PLUS User Manual
Page 82
Connecting to Stations (Sites)
Connecting to Site
Page 7-4 MDE-5079 Gasboy Fleet PLUS Installation and Implementation Guide to Passport Authorization Server (PAS) · December 2013
6
Select the correct type [for example, Passport or SiteOmat (see
)].
7
Enter the Station Number (must match the information in the PAS or Orpak Controller Unit
(OrCU) that the technician installed at the site), Station Name, IP address, user name for the
HOCOMM user (HOCOMM), and the password (123456).
8
Update the Frequency (generally 1 minute for only a few sites, 5 minutes for more than 15
sites) and the Outage Tolerance (most will set it for at least one week and some for one
month).
9
Check the Synchronize station clock with Head Office box and click Connect
).
Figure 7-6: Station Properties
Notes: 1) A SiteOmat site contains a box to map products (double-click each line in the FHO
Column. Match Diesel to Diesel and Unleaded to Unleaded, and so on).
2) The amount of time that is required for the PAS to be able to accept cards depends on
how long the download takes. Downloading the entire list of devices/card file to the
PAS is dependent on server resources, bandwidth and size of the card file.