Gasboy Fleet PLUS - Manual (Page 47)

MDE-5079 Gasboy Fleet PLUS Installation and Implementation Guide to Passport Authorization Server (PAS) · December 2013 Page 4-21
Creating Rules Converting Local Account Card File
Dual Card Setup
In the CFN system a dual card is set up the same as a single card except it begins with two
field separators (see
Figure 4-27 ).
Note: The second separator does not count against your count of three that limit the number
of digits that can be read by the PLUS System.
Figure 4-27: Raw Write Mode
You may associate a vehicle card with a driver or group of drivers in the PLUS System,
similarly to how you did it in the CFN System. Note the single card, employee card (known as
a driver card in the PLUS System) and the vehicle card depicted above. The CFN System
could process the sample number as a single card, or it could handle that card data split into a
driver and vehicle card.
Single Card No. in the CFN System = -5039-1036792579110014439-15125271
Single Card No. in the PLUS System = -5039-103679252579110014439
Dual Cards Nos. in the CFN System
Employee/Driver Card = -5039-1036792525791100-1512-71
Vehicle Card = -5039-14439-151252-0
Dual Card Nos. in the PLUS System
Employee/Driver Card = -5039-1036792525791100-
Vehicle Card = -5039-14439-
Note: PLUS System card numbers stop in this example because of the third field separator.