Expiration date, Limit and authorization fields, Price code – Gasboy Fleet PLUS User Manual
Page 32: Figure 4-5
Converting Local Account Card File
Assembling Your Card Data
Page 4-6 MDE-5079 Gasboy Fleet PLUS Installation and Implementation Guide to Passport Authorization Server (PAS) · December 2013
Expiration Date
The expiration date is in YYMM format, where YY refers to expiration year, and MM refers to
expiration month. The expiration date cannot be imported, but it can be manually entered for
each device without issues (see
Limit and Authorization Fields
The limit and authorization fields are combined to make up the group rules, later applied to the
card in your setup and import file (see
• In the CFN System, run a P LI command, which gives the type limits.
• In the CFN System, run a P AU command, which gives the fuel amount authorization
types.
Figure 4-5: CFN3 Commands
Price Code
The Price Code list the price lists you are using. Fixed pricing may be used in the FHO. If you
use a fixed price on a device, you may transfer that to your PAS device. You may get your
currently loaded prices by running a PR PRI or print price command on the CFN unit.
Following command prints the price lists from the CFN3 System:
[P:]* PR PRI
Pc
Pl
Price
1
0
3.779
1
3.779
2
3.779
3
2.719
11
0.000
2
0
4.179
1 4.129
2
4.179
3
2.000
3
0
3.879
1
3.839
2
3.879
3
2.779
4
0
0.990
1
0.990
2
0.990
5
0
4.379
1
4.379
2
4.379
7
0
3.859
1
3.689
2
3.719
3
3.759
4
3.559
5
3.859
[P:]*
Print Authorization Command in CFN3
Print Limit Command in CFN3, the old CFN
Limits and Authorization amounts combine
to make this group rule.