Gasboy Fleet PLUS - Manual (Page 22)

Installing FHO Software Installing FHO Using Full SQL Versions 2005 or 2008
Page 3-10 MDE-5079 Gasboy Fleet PLUS Installation and Implementation Guide to Passport Authorization Server (PAS) · December 2013
Installing FHO Using Full SQL Versions 2005 or 2008
To install the FHO software using full SQL versions 2005 or 2008 (see Figure 3-15 ), proceed
as follows. Full version SQL users begin here after selecting No at step 7 on page 3-7 .
Notes: 1) Even with a full SQL install, the platform support library is still needed to be in the
same directory as the Setup.exe to set up the HASP and installer. All other software
requirements such as .NET, Java, and Flash remain the same as well.
2) Before installing HO, verify that MS SQL Server 2005 or 2008/R2 Standard Edition
has been previously installed.
14 Select Custom install and click Next. The installation mode screen appears (see Figure 3-16
on page 3-11 ).
Figure 3-15: Select Installation Mode Screen - Custom Install
15 To activate the fields on the screen, select the Custom Install check box.
This screen allows selection of the installation mode and modification of port numbers
assigned to the Head Office (HO) services.
Note: Internet Information Services (IIS) should not be running on the server. Also, ensure
that the indicated ports in Figure 3-16 on page 3-11 are open to facilitate data transfer.
Note: This is a sample screen.