Gasboy Fleet PLUS - Manual (Page 79)

MDE-5079 Gasboy Fleet PLUS Installation and Implementation Guide to Passport Authorization Server (PAS) · December 2013 Page 7-1
Before You Begin Connecting to Stations (Sites)
7 – Connecting to Stations (Sites)
To communicate with the newly installed sites, they should be connected first. The installing
technician should be contacted to complete this connection. This allows the FHO to push the
devices down to the PAS unit and for transaction to be uploaded to the FHO.
Before You Begin
Before connecting to a site, ensure that all the products pumped at the site are defined in the
FHO, as well as the FHO administrative information.
Connecting to Site
To connect to a site, proceed as follows:
1 Login using administrative login credentials and click Setup (see Figure 7-1 ).
Figure 7-1: FHO Login