Gasboy CFN Series - Manual (Page 20)

Card Field Descriptions Field Data Field - Fuel Point Card Format only
Page 16 MDE-4602 Gasboy CFN Series Card Encoding Manual · November 2006
The possible field types are:
Field Data Field - Fuel Point Card Format only
The Field Data field is used only by Site Controller II/III with a Fuel Point Reader. The field
data is used in the field type indicated on the card or vehicle module, depending on the set up
(see
“Field Type Field - Fuel Point Card Format only” on page 15 ). The length of the field is
determined by the site configuration and the field type it is replacing.
FIELD TYPE FIELD TYPE FIELD TYPE
Account 065 Employee 072 SKU 083
Agency 099 Equipment 073 Social Security 084
Asset 090 Fleet 074 Stock 085
Badge 067 Job 090 Tender Type * 095
Bus 091 License 075 Track-II * 222
Card 068 Manifest 076 Trailer 104
Charge 079 Manual 077 Truck 103
Clock 069 Participant ID 093 Type 100
Company 107 Patron 078 Unit 106
Department 070 PIN 092 Vehicle 086
District 101 Reefer 102 Work Order 087
Division 089 Route 080
DIVLOC 088 Security 081
Driver 071 Shift 082
* These fields require special handling as explained below:
Tender Type: For CFN only, the 3-digit Tender Type field is used in conjunction with the Track-II field. If used, it
must come before the Track-II field. If not used, the tender will be set to Credit by default. Refer to C09215, Point
Of Sale and Shift Change Manual.
Track-II: For CFN only, the Track-II field is used to program a Vehicle Module to match a bank card or some other
non-club card format. When it is used, you do not have any of the other ID fields on the VM. When matching data
from an existing card, a field separator character (-) must be represented as a D on the Programmer.