FSR RN-8200 - Manual (Page 31)

3.0 Configuration Utility Software
RN-8200 Reference Manual Page 3-10
2) Click on the “Learn” button. The front panel S1 (green)
LED will illuminate indicating the Room Navigator is
ready and waiting to learn the command. The hour-glass
icon will begin a timeout animation while the Room
Navigator waits for the IR signal. Point the hand-held
remote at the IR Learn window and press and hold the IR
remote button for the command to be learned. The S1
(green) LED will go off and the S2 (red) LED will flash
three times indicating the learn operation is complete.
3) The CU will change its status to “Processing” while the
Room Navigator processes the IR signal. The CU then
retrieves the IR command and changes the status to
Learned as show in the figure to the right. Click the “Ok”
button to end the IR learn process for this location.
All IR commands to be used in your application should be
learned and stored in this same manner. The resultant IR
command library is then available for playback as part of
the configuration of the button functions that will be done
using the “Button Cmd Setup” Tab.
3.2.7.2 Immediate Playback of IR Commands
If the Room Navigator has an IR emitter connected to one of the Room Navigator IR ports and to a device, you can
use the IR Setup Tab to playback any IR command in the library as a test. The figure below shows the IR Setup Tab
and the elements associated with immediate playback of learned IR commands.
The “Playback” button
executes the playback of
the highlighted command
“View Raw” Button
provides a quick look at the
highlighted IR command
This box identifies the
output port selection for
the playback
This box identifies the
number of time to repeat
the playback
3.2.7.3 IR Learning Help and Tips
On the Learn IR Command Panel, there is a Help button that accesses IR Learning Help Information. This
information contains tips for the best learning technique and other information about learned IR codes. Before
learning IR codes, it is recommended that you read this help information. A short excerpt from the help information
is shown below.