FSR RN-8200 - Manual (Page 14)

2.0 Installation and Operation Overview
RN-8200 Reference Manual Page 2-6
2.2.4 RJ-45 LAN Interface Cabling
This port is used to access the RN-8200 Embedded Web Server via TCP-IP
from a host computer or network.
Cable type:
RJ-45 Crossover for direct computer to RN-8200 control
RJ-45 Straight through for Network to RN-8200 control
Recommended Maximum Length: 329 feet
Crossover Cable
Standard Patch Cable
2.2.5 Relay Control Ports
The RN relay ports shown above, consist of 4,
single-pole, normally open relays grouped as 2
sets with each set sharing a common leg. The
internal relay configuration is shown below and a
typical application is shown to the right.
C 1 2 C 3 4
Internal Configuration
RELAY OUTPUT
C C 1 2 3 4
RED
WHT
BLK
RED
WHT
BLK
Sample Application: Da-Lite Screen Control
Setting Relay 1 momentarily drives both screens up
Setting Relay 2 momentarily drives both screens down
Wire colors are per screen control interface