FSR RN-8200 - Manual (Page 25)

3.0 Configuration Utility Software
RN-8200 Reference Manual Page 3-4
3.2.3.3 “Options” Settings
On the menu bar the “Options” item provides
automatic features for the CU that can be turned
On/Off depending on your personal preferences.
The options are turned on by selecting the
corresponding check box. The options are primarily
to turn on automatic interaction with the connected
Room Navigator as items are configured in the CU.
All the options can be executed manually using
command in the “Device” pull down menu and/or
using buttons on the various CU tabs. The options
are provided as a means to reduce user actions
required to configure the Room Navigator and
should be taken advantage of once the user becomes
more familiar with how the CU and Room
Navigator interact.
A brief description of each option item is provided below:
OPTION ITEM DESCRIPTION
Automatically Execute “Get All Data”
Upon Connection to
the Room Navigator
Automatically executes the Device>Get All Data function to extract the current
configuration from the connected Room Navigator
Automatically Clear Room Navigator
Button Cmds when CU Button Cmds are
Cleared
Automatically clears both the corresponding configuration data in the CU’s buffer
and in the connected Room Navigator whenever a “Clear” button is pressed on any
of the function tabs of the CU.
Automatically Clear Room Navigator
Notes when CU Notes are Cleared
This option makes the clear buttons on the Notes Tab clear both the data in the CU’s
buffer and the data in the connected Room Navigator
Automatically Send Button Data to Room
Navigator when CU Button Data
Changes: This option applies to working on the Button Cmd Setup Tab and it automatically
configures the connected Room Navigator as Button Commands are setup as
opposed to asking the user each time
Automatically Clear Room Navigator IR
Data when CU IR Data is Cleared
This option makes the clear buttons on the IR Setup Tab clear both the data in the
CU’s buffer and the data in the connected Room Navigator.
Generate SendAllScript.txt when “Send
All Data” is Executed This generates a text file in the application directory whenever a “Send All Data”
from the Device Menu is Executed . The script is useful to see the ASCII commands
used to configure the Room Navigator
3.2.3.4 “Help”
The help menu item bring up the version identification information for the CU. For help using the CU, use this
manual.
3.2.4 FW Update Tab
3.2.4.1 Obtaining the Room Navigator Current Version Data
In the upper portion of the FW Update Tab is the “Device Information group box and within it is a “Get Version
Data” button. Clicking this button will update the text boxes to the right of the button with the FW and HW version
from the connected Room Navigator. The figure below shows a closer look at the Device Information group box
after the Get Version Data button was clicked.