Flowserve MX/QX Profibus DP/PA Field Unit - Manual (Page 12)

PB DPV1 / PA Field Unit Installation and Maintenance FCD LMENIM2336-03 – 12/12
12
2
System Components
and Installation
2.1 Introduction
This section is an overview of the components used in the PROFIBUS system and their integration
with the MX/QX actuator. The MX/QX PB field unit is installed in the control compartment of the
actuator as shown in Figures 2.1a and 2.1b. The PROFIBUS network cable from the host control
station connects to the fieldbus unit at the actuator terminal block.
The Network Cabling section of this chapter is broken into two sections; PROFIBUS DP and
PROFIBUS PA.
Refer to Appendix A for detailed wiring connections.