Epiphan VGA Printer - Manual (Page 73)

5. Advanced Printer Configuration Controlling Print Jobs
User Guide Page 73
You can use the Search function to only display some jobs.
You can display all jobs completed by this printer since the
VGA Printer device was powered on.
For each print job you can:
• Reprint job to start a print job that has been stopped.
• Hold job to temporarily stop the VGA Printer device from
printing this job. The VGA Printer device will print the
next job in the queue.
• Release job to release a held job for printing.
• Cancel job to cancel a print job and remove it from the
queue.
• Move job to move a print job to another printer.
To view all print jobs
1 Log into the Web admin interface.
2 Scroll down to the Configure VGA Printer section.
3 Select Printers configuration and jobs control.
The Printers page appears.
4 Select the Jobs tab to view all print jobs for all printers.
Similar to viewing the print jobs for an individual printer you
can reject, move, cancel, reprint, and hold jobs.
To restart stopped print jobs
Use the following procedure to restart print jobs that have been
stopped. The print jobs could have been stopped because they
were added to the queue of a printer that was not connected or
turned on, moved to a printer’s print queue from another print
queue, or for other reasons. In most cases, the following steps will
restart a stopped print job.
1 Log into the Web admin interface.
2 Scroll down to the Configure VGA Printer section.
3 Select Printers configuration and jobs control.
The Printers page appears.