Epiphan VGA Printer - Manual (Page 55)

4. VGA Printer Web admin interface Firmware Upgrade
User Guide Page 55
Firmware Upgrade
You can obtain new firmware versions from Epiphan Support.
New firmware is released to fix known problems or to add new
features.
To install new firmware
Installing new firmware can take several minutes. Once you start
a firmware upgrade, you cannot print captured images until the
firmware upgrade is complete.
1 Get the new firmware file from Epiphan Support.
2 Place a copy of the firmware file on the PC you use to connect
to the Web admin interface.
3 Log into the Web admin interface.
4 Scroll down to Firmware Upgrade.
5 Select Browse and then select the firmware file.
6 Select Save and Upgrade Firmware.
The firmware uploads. The VGA Printer device unpacks the
firmware update file, verifies the contents and then upgrades
the firmware.
Messages similar to the following appear on the Web admin
interface.
Local update detected: /tmp/rfc1867_NHWCk7
Unpacking update...
linux
initrd.img
rootfs.img
syslinux.cfg
default.cf.default
boot.img
md5sum
Verifying update...
linux: OK
initrd.img: OK
rootfs.img: OK
syslinux.cfg: OK
default.cf.default: OK
boot.img: OK
Substituting files. Do NOT interrupt...
Update completed successfully. You can reboot the
system.