Epiphan VGA Printer - Manual (Page 6)

1. Introduction Adding Printers
Page 6 Epiphan VGA Printer
Figure 1: VGA Printer components
Configuring and operating the VGA Printer device from the Web
admin interface is simple. You can connect to the Web admin
interface with any web browser and configure settings such as the
VGA Printer network configuration, printer settings, and image
capture optimization.
The VGA Printer device can also get network settings from a
DHCP server if there is a DHCP server on the network.
Adding Printers
In most cases, adding a printer to the VGA Printer device is quick
and easy, especially if the VGA Printer device can automatically
find your printer.
A wide range of printer options, print job settings, and other
functions are available if you require them. But in most cases once
you have used the VGA Printer device to automatically find and
configure a printer you do not have to spend much time working
with the printer configuration.
While there are a lot of settings and options, in most cases you do
not need to use them. However, they are available for advanced
users or if you have special requirements.
Printer
(Print Captured
Images) Video Source
(Equipment with VGA or
DVI-A Output)
Epiphan
VGA Printer
VGA or
DVI-A
Cable
Connection to printer
(USB or network)
VGA Printer
Admin Interface