Epiphan VGA Printer - Manual (Page 68)

5. Advanced Printer Configuration Selecting the Default Printer
Page 68 Epiphan VGA Printer
7 Select VGA Printer Config to display the Web admin
interface.
8 Check the Configure VGA Printer section. If the message
Error: printer is not configured! appears, you must add a new
printer or set one of the already added printers to be the
default printer.
• To add a new printer, see
“Adding Printers” on page 27 or
“Adding a Printer That the VGA Printer Device Cannot
Find Automatically” on page 57 .
• To set a printer to be the default printer, see “Selecting the
Default Printer” .
Selecting the Default Printer
If you have added more than one printer, you may need to
change the printer that the VGA Printer device prints to. You
change the printer by making the printer that you want the VGA
Printer device to print to the default printer.
Also, if you delete the printer that the VGA Printer device was
printing to, you may need to select a default printer.
Note: You don’t always have to select a default printer. Setting
the default printer is available if you want to change the printer
that the VGA Printer device prints to, or if Configure VGA
Printer displays the message Error: printer is not configured!.
Only one printer can be the default printer. If the default printer is
turned off or disconnected, print jobs are stored in that printer’s
print queue. You can either move those print jobs to another
printer, or the stored print jobs will be printed when the printer is
connected or turned on again. You may have to start the print
jobs manually, see “Controlling Print Jobs” on page 70 ).
To change the default printer
1 Log into the Web admin interface.
2 Scroll down to the Configure VGA Printer section.