Epiphan VGA Printer - Manual (Page 22)

2. Installation and Getting Started If the Network Doesn’t Have a DHCP Server
Page 22 Epiphan VGA Printer
3 Enter the following:
User Name: admin
Password: (no password required)
4 Press Enter.
The VGA Printer Web admin interface appears. Figure 7
shows a sample VGA Printer Web admin interface. If the VGA
source is active, the display shows a captured image.
Otherwise it will be blank.
Changing the VGA Printer IP Address
You can change the VGA Printer IP address at any time. You may
need to change the IP address so that PCs on the network can
connect to the VGA Printer Web admin interface and so that the
VGA Printer device can connect to network printers.
• If the network does not have a DHCP server you will most
likely need to change the VGA Printer IP address.
• If the network does have a DHCP server you might also want
to change the VGA Printer IP address if you would rather the
the VGA Printer device have a static IP address instead of a
dynamic address assigned by the DHCP server.
• You can also change the VGA Printer IP address even if the
DHCP server has assigned an IP address. If for some reason
the DHCP server goes down, you can switch the VGA Printer
to connect using the static IP address.
To change the VGA Printer IP address
This procedure describes how to disable DHCP and give the VGA
Printer device a static IP address.
1 Log into the VGA Printer Web admin interface.
2 Scroll down to Change IP Address.
You can also use your web browser find feature to find
Change IP Address.