Epiphan VGA Printer - Manual (Page 44)

4. VGA Printer Web admin interface Configuring the Ethernet Bridge For Use if You Have Only
Page 44 Epiphan VGA Printer
11 Change the IP address of the PC connected ETH 1 to:
IP Address: 192.168.10.103
Subnet Mask: 255.255.255.252
12 Connect ETH 2 directly to the printer Ethernet port using a
cross-over or regular Ethernet cable.
13 Log into the Web admin interface by browsing to the
following IP address:
http://192.168.10.101
14 Follow the instructions in “Adding Printers” on page 27 to
add the network printer to the VGA Printer configuration.
Figure 21:Connecting a network printer directly to the VGA
Printer ETH 2 port
VGA
Cable
ETH 1
ETH 2
PC
VGA source
Printer
(Print Captured
Images)