Epiphan VGA Printer - Manual (Page 50)

4. VGA Printer Web admin interface Rebooting or Restarting the VGA Printer device
Page 50 Epiphan VGA Printer
Rebooting or Restarting the VGA
Printer device
Some configuration changes, require you to reboot the VGA
Printer device. For an example, see “Changing the VGA Printer IP
Address” on page 22 . You may also want to reboot the VGA
Printer device for other reasons.
To reboot or restart the device
1 Log into the Web admin interface.
2 Scroll down to Reboot the system.
3 Select Reboot.
The VGA Printer device takes a short time to reboot and
resume operation.
Maintenance Configuration
The VGA Printer device uses the maintenance configuration
settings that you set on the Web admin interface to communicate
with the Epiphan maintenance server. This allows Epiphan to
review the VGA Printer configuration, firmware version, and
other basic operating parameters. If you are having problems
with the VGA Printer device and you contact Epiphan Support,
the support team can use this maintenance information to help
remotely troubleshoot the problems.
Note: The VGA Printer device does not send private information
to the Epiphan maintenance server, just basic operation and
configuration information. The amount of traffic sent to the
Epiphan maintenance server is small. The traffic should not affect
network or Internet connection throughput.