Epiphan VGA Printer - Manual (Page 39)

4. VGA Printer Web admin interface Configuring the VGA Printer device
User Guide Page 39
Page Fit The VGA Printer device prints one image per
page and scales captured images up or down
to fit on the page size configured for the
printer.Fit image keeping original aspect
ratio is the default setting. This setting scales
the image to fit on the printed page without
distorting the image. This setting may result
in white space on the printed page if the
image doesn’t match the shape of the page.
You would usually select this page fit option
to avoid distortion of the image if the shape
of the captured image is very different from
the shape of the printer page.
Select Fit image to fill the whole page to
scale the image to fill as much of the printed
page as possible. Usually you would only
select this option if the captured image
closely matched the shape of the printed
page. If the captured image was a much
different shape than the page this page fit
option could distort the image an
unacceptable amount.
Annotation You can select Add annotation to the printed
page to add text to each captured image
printed by the VGA Printer device. The text
appears at the bottom of the page. Add the
text for the annotation to the Annotation text
field.
You can also select Include timestamp to the
annotation to add the current date and time
to the right of the annotation in the printed
image. The date and time format is
yyyy-mm-dd hh:mm:ss.