Epiphan VGA Printer - Manual (Page 56)

4. VGA Printer Web admin interface System Information
Page 56 Epiphan VGA Printer
7 Select Continue.
To complete the firmware upgrade you must reboot the VGA
Printer device.
8 Scroll to the Reboot the system section of the Web admin
interface, select Reboot and select Continue.
The device reboots and starts up running the new firmware.
This may take a few minutes.
9 Log into the Web admin interface.
10 Scroll down to System Information and select View System
Information.
11 Confirm that the VGA Printer device is running the new
firmware version.
System Information
Scroll down to System Information and select View System
Information to display the following:
• The current firmware version including details of the
firmware build
• Information about the Frame Grabber installed in your VGA
Printer
• Information about the VGA Printer device CPU
• VGA mode information.
Figure 25:System Information