Epiphan VGA Printer - Manual (Page 18)

2. Installation and Getting Started Logging Into the VGA Printer Web admin interface
Page 18 Epiphan VGA Printer
Logging Into the VGA Printer Web
admin interface
You use the VGA Printer Web admin interface to configure the
VGA Printer device. Log into the VGA Printer Web admin
interface from any web browser. Before you log into the Web
admin interface you need to determine the IP address of the VGA
Printer device.
Note: You can always log into the VGA Printer Web admin
interface by browsing to the default VGA Printer IP address,
which is http://192.168.255.250 . To log into the VGA Printer
device using this IP address you must change your PC to use the
static IP address 192.168.255.249 and netmask 255.255.255.252.
Then open a Web browser and browse to http://192.168.255.250 .
If the Network has a DHCP Server
The VGA Printer device can get network settings automatically if
the network has a DHCP server. After connecting the VGA
Printer device to the ethernet network, you can use the Network
Discovery Utility or check the DHCP server logs to determine the
IP address given to the VGA Printer device.
To log into the VGA Printer Web admin interface
1 Start a web browser on a PC connected to the same network as
the VGA Printer device.
2 Browse to:
http://
3 Enter the following:
User Name: admin
Password: (no password required)