Epiphan VGA Printer - Manual (Page 52)

4. VGA Printer Web admin interface Maintenance Configuration
Page 52 Epiphan VGA Printer
You can enable and disable remote support and the connection to
the maintenance server independently. The following table
describes the results of different configurations.
Maintenance
Server
The address of the Epiphan maintenance server.
This address is usually epiphany.epiphan.com.
However, you can change this address if
required, (but usually only as recommended by
Epiphan Support). For example, you may have to
change this address to a numeric IP address if the
VGA Printer device cannot connect to a DNS
server.
Maintenance
Port
The TCP port that the VGA Printer device uses to
connect to the Epiphan maintenance server. This
is usually port 30. However, you can change this
address if required or as recommended by
Epiphan Support.
Enable
Remote
Support
Enable
Connection to
Maintenance
Server Result
Yes Yes The VGA Printer device connects to
the Epiphan maintenance server. If
required, Epiphan Support can
remotely connect to the device with
special access privileges.
No Yes The VGA Printer device connects to
the Epiphan maintenance server.
Epiphan Support can remotely
connect to the Web admin interface
with the same access privileges as an
administrator.