Epiphan VGA Printer - Manual (Page 14)

2. Installation and Getting Started Connecting the VGA Printer Device
Page 14 Epiphan VGA Printer
Connecting the VGA Printer Device
This section describes how to connect the VGA Printer device to a
VGA or DVI-A video source, a printer, and to your network. Use
the network connection to connect to the VGA Printer Web admin
interface. The VGA Printer device also uses the network
connection to communicate with network printers.
Figure 4 shows VGA Printer connectors, buttons, and LEDs.
Figure 4: Connecting the VGA Printer device
To connect the VGA Printer device you need:
• A VGA or DVI-A video source.
• An IP-based Ethernet network.
• One or more printers the can connect to the network or to a
VGA Printer USB port.
To connect and turn on the VGA Printer device
1 Use a VGA cable to connect the VGA signal output source to
the VGA IN port.
You can connect the VGA Printer device to any VGA source.
If you are connecting to a DVI-A video signal, use a VGA to
DVI-A adapter.
Printer
(Print Captured
Images) Video Source
(Equipment with VGA or
DVI-A Output)
Epiphan
VGA Printer
VGA or
DVI-A
Cable
Connection to printer
(USB or network)
VGA Printer
Admin Interface