Epiphan VGA Printer - Manual (Page 46)

4. VGA Printer Web admin interface Changing VGA Printer Sound Volume
Page 46 Epiphan VGA Printer
Changing VGA Printer Sound Volume
You can configure the VGA Printer device to produce a sound
each time a print request is received. You can also set the sound
volume level. Set sound volume to 0 to turn sound off.
You can set the sound volume to 10, 25, 50, 75, or 100. Try
different sound levels until you find the one that works for you.
Configuring VGA2USB Adjustments
The VGA Printer device automatically adjusts image capture
settings every time it starts up. This automatic adjustment is
repeated every 60 seconds during operation. You can change the
interval between automatic adjustments if you want them to
occur more or less often.
Normally you would not have to make manual image
adjustments. However, you may have special requirements or for
other reasons have image quality problems that can only be fixed
by making manual adjustments.
The Web admin interface contains most of the information that
you need to make image adjustments including a brief
description of the affect of each adjustment and the adjustment
range.
Because image adjustments are made automatically there are no
default image adjustment settings. Also, changing image
adjustments means making relative adjustments from the settings
auto configured by the system.
To configure image adjustments from the Web admin
interface
1 Log into the Web admin interface.
2 Scroll down to the VGA2USB Adjustments section.