Comtech EF Data CMR-6000 Manual - Manual (Page 99)

Digicast Media Router S2 Receiver CMR-6000 Revision 1
Device Management via User Interfaces MN-CMR6000-IOM
4-69
4.5 Telnet Interface
Telnet provides a textual interface over a LAN. Most PCs have the capability to use Telnet. Navigate the
menus in the same manner as when using the Terminal Interface. With specific exceptions as noted in the
Terminal Interface section, the menus available via Telnet and Serial interfaces are identical.
To use Telnet on a Microsoft Windows ® product, click , then . The Run dialog box
opens:
In the
Open: text window, enter “telnet xxx.xxx.xxx.xxx,” where xxx.xxx.xxx.xxx is the IP address of
the CMR-6000. If the port number has been modified from the standard 23 via the Terminal Interface,
then the port number must be appended with a colon to the IP address.
Click
OK to continue to the login prompt. At the login prompt, enter the user name and password to gain
access to the telnet interface.
Press and the Main Menu will display.
IMPORTANT
The default username is “comtech” and the default password is “comtech”, both of which
are case sensitive.