Comtech EF Data CMR-6000 Manual - Manual (Page 48)

Digicast Media Router S2 Receiver CMR-6000 Revision 1
Device Management via User Interfaces MN-CMR6000-IOM
4-18
4.2.12 Tuner MPEG TS Route Configuration
From the pull down, select which interface (Tuner or ASI) to configure.
Select the “Service List” button at the bottom of the page to see all services on the particular input. This
is achieved by looking at the Program Stream Information (PSI) that is contained in the Program
Association Table (PAT) and Program Mapping Table (PMT) – all detected programs will be displayed
for either input port selected.
Enable
Enables or disables the route.
Name
The name of the incoming program that is extracted from the Program Service Information (PSI) and the
Service Descriptor Table (SDT).