Cmr6000-ch1_introduction, Chapter 1. introduction – Comtech EF Data CMR-6000 Manual User Manual
Page 19
1–1
Chapter 1. INTRODUCTION
Figure 1-1. Digicast Media Router S2 Receiver – Front & Rear Panels
The Comtech EF Data (CEFD) Digicast Media Router S2 Receivers– referred to collectively throughout
this manual as the “CMR-6000” – comes in one configuration:
CEFD Digicast Media Router S2 Receiver – CMR-6000 L-Band / Asynchronous Serial Interface (ASI)
to IP/ASI Receiver
The CMR-6000 is an economical, L-Band-to-IP Receiver providing price-versus-performance
unparalleled in today’s market. Additionally, the CMR-6000 provides the ability to multiplex the L-band
tuner stream to an incoming ASI transport stream.
The CMR-6000 receives Multiprotocol Encapsulated (MPE) data as specified in ETSI EN 301 192 over
MPEG-2 packets or raw Transport Streams (TS) carrying audio, video or data over an L-Band input.
The CMR-6000 supports:
•
DVB-S (2 to 45 Msps)
FEC Rates: 1/2, 2/3, 3/4, 5/6 and 7/8
•
DVB-S2 QPSK (2 to 32 Msps)
FEC Rates: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9 and 9/10
•
DVB-S2 8PSK (2 to 32 Msps)
FEC Rates: 3/5, 2/3, 3/4, 5/6, 8/9 and 9/10