Comtech EF Data CMR-6000 Manual - Manual (Page 133)

Digicast Media Router S2 Receiver CMR-6000 Revision 1
Configuring and Controlling the Digicast CMR‑ 5975 Media Router with SNMP MN-CMR6000-IOM
E–11
E.5.1 Private MIB OIDs on Digicast Products
The following describes how the Enterprise (Private) MIB elements (OIDs) can be used to obtain
(GET) information or configure (SET) a parameter on the Digicast CMR-6000 Media Router.
The Enterprise MIB elements (OIDs) are broken down as follows:
OID Number OID Description GET or SET
1.3.6.1.4.1.18723.6000.1.1 dniAggregateStatsTunerStats Tuner Statistics GET
1.3.6.1.4.1.18723.6000.1.2 dniAggregateStatsTunerAcquiState Tuner Acquisition State GET
1.3.6.1.4.1.18723.6000.1.3 dniAggregateStatsEsNo Es/No in dB GET
1.3.6.1.4.1.18723.6000.1.4 dniAggregateStatsEbNo Eb/No in dB GET
The Enterprise Traps are broken down as follows:
Trap Name Description
software reset Software Reset has occurred
dropping packets Unit is dropping packets
dropping packets cleared Unit has stopped dropping packets
redundancy primary on Redundancy – Primary Online
redundancy backup on Redundancy – Backup Online
dniEbNoThreshhold EbNo value is now set above the defined limit
dniEbNoThreshholdFail EbNo value has fallen below the defined limit
dniRedundancyBackup Redundant backup unit is now active
dniRedundancyPrimary Redundant primary unit is now active
dniRedundancyModeConflict A conflict in redundancy mode has been detected
dniMPEGPIDConflict MPEG-TS PID Conflict has occurred
dniDMAOverflow DMA Overflow
dniDMAOverflowCleared DMA Overflow Cleared