Comtech EF Data CMR-6000 Manual - Manual (Page 107)

Digicast Media Router S2 Receiver CMR-6000 Revision 1
Software Upgrade MN-CMR6000-IOM
A–5
Step Procedure
1
Select (D) for Download Image.
2
At the “Image type” prompt, enter: 1 for Application or 2 for FPGA or 3
for Redboot.
3
Enter the TFTP IP server address. Once the TFTP IP server address is
entered, the software update will begin to download.
IMPORTANT
Do NOT power down the unit during the upgrade process.
4
When the update is complete, the message “Press any key to
continue” will be displayed at the bottom of the screen.
5
After the unit has been upgraded, reset the unit by selecting (R) for
Reset and ‘Y’ to confirm the reset