Errata c dvb-s2 pilot command, Errata c, Comtech ef data documentation update – Comtech EF Data CMR-6000 Manual User Manual
Page 7: Change specifics

AGILE DOC ID ER-CMR6000-EC1 THIS DOCUMENT IS NOT SUBJECT TO REVISION/UPDATE! AGILE
C09574
1
Errata C
Comtech EF Data Documentation Update
Subject:
Changes to DVB-S2 Pilot, Chapter 4 and Appendix D
Date:
October 5, 2009
Original Manual
Part Number:
MNCMR6000.IOM
Rev 1
Errata Number /
Agile Document ID
ER-CMR6000-EC1
Agile CO Number
C09574
Change Specifics:
This information will be incorporated into the next revision:
Added to Chapter 4, 4.2.14.1 Primary and Backup Tuner Configurations, p. 4-24:
Pilot
Enables or disables the Pilot for DVB-S2 mode of operation only.
Important: Pilots must be enabled for reliable operation below 6.0 Msps.
Added to Chapter 4, 4.3.3.1.2 Tuner Config, p. 4-35:
Pilot
Enables or disables the Pilot for DVB-S2 mode of operation only.
Important: Pilots must be enabled for reliable operation below 6.0 Msps.
Added to Chapter 4, 4.4.11.1 Tuner Configuration Menu, p. 4-66:
Pilot
Enables or disables the Pilot for DVB-S2 mode of operation only.
Important: Pilots must be enabled for reliable operation below 6.0 Msps.
Added to Appendix D, D.2 Required Information for Setting up a Digicast Satellite Receiver, p. D-3:
8. Pilots
@
Important: Pilots must be enabled for reliable operation below 6.0 Msps.
Added to Appendix D, D.5 Required Important Terms to Understand, p. D-7:
Pilots
Important: Pilots must be enabled for reliable operation below 6.0 Msps.