Comtech EF Data CMR-6000 Manual - Manual (Page 66)

Digicast Media Router S2 Receiver CMR-6000 Revision 1
Device Management via User Interfaces MN-CMR6000-IOM
4-36
4.3.4 FAST
The CMR-6000 supports the Comtech EF Data FAST code, which is the capability to upgrade your
CMR-6000 by entering a number unique to your CMR-6000 unit by its serial number.
Comtech EF Data’s FAST (Fully Accessible System Topology) system permits the purchase and
installation of options through special authorization codes, entered remotely or through the front panel.
FAST allows immediate implementation of different options through the user interface keypad. All FAST
options are available through the basic platform unit.
The menu options for FAST are:
Serial Number
Option
Upgrade
Serial Number
Displays the serial number of the unit. FAST code options are unique for each unit by the unit’s serial
number. When requesting an update, or entering a FAST code on a unit, the FAST code upgrade will only
be applicable to the serial number that it was generated from.
Option
Use the Up/Down arrow keys to view the currently installed options on the CMR-6000.
Upgrade
The CMR-6000 can be configured with multiple options for functionality, and with the FAST code
capability, a unit can be upgraded after it has been deployed and in use without being returned to the
factory or replaced.
FAST code options for the CMR-6000 are:
ASI transmit
ASI receive
L-Band receive
When upgrading a CMR-6000 with the 20 digit FAST code, enter the code carefully on the bottom line
by using the Left/Right arrow keys to move to each character position, then editing the character in that