Comtech EF Data CMR-6000 Manual - Manual (Page 76)

Digicast Media Router S2 Receiver CMR-6000 Revision 1
Device Management via User Interfaces MN-CMR6000-IOM
4-46
4.4.4.4 Load Factory Defaults
The Load Factory Defaults feature allows the user to restore the unit to the original configuration as it was
set up before leaving the factory.
IMPORTANT
This feature should be used with caution, because all configured settings, including
usernames and passwords, will be removed.
The only parameters that remain persistent after execution of a Load Factory Defaults are the network
interface settings. The LAN attributes, such as IP Address, Subnet Mask and Default Gateway, are retained
after the unit is restarted.
4.4.5 ASI Configuration Menu
4.4.5.1 ASI MPE/IP Configuration Menu