Comtech EF Data MiniMAC Operation ManualOperation Manual Operation Manual - Manual (Page 99)

SMS-7000 Protection Switch Screens MiniMAC Rack Management System
7–16 Rev. 0
To check the status of one or more modulators:
1. Click on each MOD X field (where x is the number of the modulator).
2. The status appears as the selected modulator(s) are polled.
To change the active status of a modulator:
Command Response
Select PRIME MODULATOR
Type Prime Modulator Number or use the increase/decrease arrows.
Click on YES in the ACTIVE Field or NO.
Click on EXECUTE or CANCEL to abort the procedure