Comtech EF Data MiniMAC Operation ManualOperation Manual Operation Manual - Manual (Page 113)

SMS-7000 Protection Switch Screens MiniMAC Rack Management System
7–30 Rev. 0
7.5.4.4 Load Prime Modem Address
Click on the LOAD PRIME MODEM ADDRESS button. The Load Prime Modem
Address window will appear on the right.
To load a prime modem with an address change:
1. Highlight the number in the SELECT MODEM field, and use the
increase/decrease arrows to select the appropriate modem number (or type the
number).
Note: Address 0 is a global address and is reserved.
2. Highlight the number in the ADDRESS (1-255)? field, and use the
increase/decrease arrows to select the appropriate address (or type the number).
3. Choose [EXECUTE] to send the command, or [CANCEL] to abandon the
change.