Comtech EF Data MiniMAC Operation ManualOperation Manual Operation Manual - Manual (Page 130)

SDM-300 Modem Screens MiniMAC Rack Management System
6–10 Rev. 0
6.3.3 View - Stored Faults
Up to 10 faults can be stored for each stored fault category. For additional information
about stored faults and times/dates of occurrence, use the System Log. To display to
System Log; Select System, Report Generator on the Main menu.
To request stored faults information from the MiniMAC, type the stored faults number
(0 – 9) in the selected category. Click on the Stored Faults button. The COMMAND
CONFIGURATION window will appear. Click on OK.