Comtech EF Data MiniMAC Operation ManualOperation Manual Operation Manual - Manual (Page 101)

SMS-7000 Protection Switch Screens MiniMAC Rack Management System
7–18 Rev. 0
To check the status of one or more backup modulators:
1. Choose each MOD BX field (where x is the number of the modulator).
2. The status appears as the selected modulator(s) is/are polled.
To change the active status of a backup modulator:
1. In the SELECT BACKUP MODULATOR field, type the number or use the
increase/decrease arrows to select the backup modulator number.
2. In the Active? field, choose “YES” to activate, or “NO” to deactivate the
modulator.
3. Choose [EXECUTE] to send the status change, or [CANCEL] to abandon the
change.