Comtech EF Data MiniMAC Operation ManualOperation Manual Operation Manual - Manual (Page 19)

Index MiniMAC Rack Management System
i–2 Rev. 0
Modulator/Demodulator Commands, 9–25
MUX PCB, 6–1, 6–28, 9–5, 9–20
Opening the COM Window, 6–2, 6–24, 6–33, 6–34
Options, 1–11
Options – Edit Mode, 5–1, 5–9, 5–10, 5–11, 5–12
Options – Edit Mode - Font, 5–1, 5–10
Options – Saving the Edit, 5–1, 5–11
Options – System Colors, 5–1, 5–5
Path to Sound Recorder, 1–1, 1–2
Polling – Force, 6–1, 6–21, 7–1, 7–7, 8–10, 9–2
Polling – Online, 6–1, 6–21, 7–7
Polling Menus, 6–1, 6–21, 7–7
Prime Demodulator Configuration, 7–19, 9–27
Prime Modem Assignment, 7–1, 7–19, 7–31
Prime Modulator Configuration, 7–15
RC-1150 LNA Controller, 7–1, 7–15
Remote Site 1, 6–1, 6–31
RFT-500 Radio Frequency Terminal, 9–29
Satellite Data Converters, 9–18
Satellite Switches, 1–7, 1–8, 1–9, 9–2
Saving Changes to the System Log Configuration, 6–1,
6–20
Saving the Alarm Setup Changes, C–5
SDC-400 Down Converter, B–1, B–9
SDC-600 Up Converter, 9–12
SDM-300 Commands, 9–16
SDM-308-4 Satellite Modem, 6–1, 6–24
SDM-308-5 Satellite Modem, 9–2
SDM-6000, Satellite Modem, 9–6
SDM-8000, Satellite Modem, 9–6
SDM-9000, Satellite Modem, 9–6
Set Control Mode, 1–7, 9–11,
Set Menus, 6–2, 6–35
Set Mode Remote, 7–2, 7–33, 9–23
Setting Minor, Major, or Neither Alarms, 7–2, 7–33
Side A or B Status Tab, 6–19
SMS-301 1:1 Protection Switch, 8–1, 8–3,
SMS-658 Modem Protection Switcjh, 9–19
SMS-658 Switch Rack, 9–1, 9–8, 9–24
SMS-7000 Switch Rack, 9–1, 9–8
SMS-758, 9–1, 9–7
SMS-758 Switch Rack, 9–28
Sound, B–1, B–9,
Status – Channel Status, 3–6, 5–2, 6–1, 6–5, 6–22, 6–31,
7–1, 7–8, 7–9, 7–23, 7–24, 7–25, 7–26, 8–1, 8–2, 8–3,
8–6, 8–7, 8–9, 9–2, 9–13, 9–30, 9–31
Status – Equipment Type, 3–11, B–1, B–2, B–3, B–6,
Status – Equipment Type Request, 6–1, 6–22, 8–1, 8–7,
6–1, 6–22, 8–1, 8–7, 6–1, 6–22, 8–1, 8–7
Status - Menu, 6–1, 6–22
Status Menu, 7–1, 7–8
Status/Command Tab, 7–1, 7–9
Switch Configuration Screen, 3–3
System Commands, 7–3
System Setup Spreadsheet, 5–4, 7–1, 7–27
System-Report Generator, 6–2, 6–24, 6–33
Troubleshooting, 1–6, 9–1, 9–30
Using the COMM Window, 6–1, 6–13
Using the Task Manager, 6–1, 6–13
V2200 Dual Converter Commands, 10–1, 10–2
V2200 Dual Converter Rack, 8–9
Verify Active Modem Configuration, 1–1, 1–4, 7–28
View – Fault Screens, 7–27, 7–28
View – Modem Faults, 6–8
View – Overview, 6–1, 6–7, 7–3, 7–4
View - Stored Faults, 6–1, 6–7, 7–3
View Latest Alarm, 6–10
View Menus, 3–1, 3–2
Viewing Incoming and Outgoing Messages, 6–1, 6–7
Viewing Stored Alarms, 1–1, 1–12
Viewing the Rack Groups, 3–1, 3–6
Viewing the System Log, 1–1, 1–4
Wave File, 2–1, 2–3, B–1, B–7, B–8,